Boss JamStation JS-5 Owner's Manual page 52

Let's Record Guitar Play
4
Press [LONG REC] and select the recording quality.
Hi-Fi: Select this when you want to perform high-quality recording.
LONG: Select this when you want to make the recording time longer.
When you select "LONG," [LONG REC] lights up.
5
Adjust the recording level.
Play your guitar, and turn [REC LEVEL] to adjust the recording level of the
sound that is input to REC INPUT so that the " " at the far right of the level
meter is displayed within the appropriate range of levels (see diagram
below).
fig.QS05-04
6
Press [START], getting the button to light, and start recording.
If you've made the setting for count-in (p. 60), the count-in appears on the
left-hand display, and the count sound is played at the same time.
After the count-in display, recording starts.
fig.QS05-05
7
When recording is finished, press [STOP].
[REC] goes dark, and the Song screen reappears.
Playback
8
Press [RESET].
9
Press [START].
The audio data is played back in time with the performance.
52
Final measure
Beginning measure
Recording level
Appropriate range
The count-in is a count
(metronome) sound of one
or two bars inserted before
the measure where
recording starts. Using the
count-in lets you make sure
of the tempo and the
timing for starting
recording.