Jbig Reception - Ricoh B064 SERIES Service Manual

Hide thumbs Also See for B064 SERIES:

Table of Contents

4.3.2 RECEPTION

First, the FCU stores the incoming data from either an analog line to the SAF

memory. (The data goes to the FACE3 at the same time, and is checked for error

lines/frames.)

The FCU then decompresses the data and transfers it to page memory. If image

rotation will be done, the image is rotated in the page memory. The data is

transferred to the BICU.

If the optional G3 unit is installed, the line that the message comes in on depends

on the telephone number dialled by the other party (the optional G3 unit has a

different telephone number from the main fax board).

JBIG Reception

When data compressed with JBIG comes in on PSTN-1 (the standard analog line),

the data is sent to the QM-CODER for decompression. Then the data is stored in

the page memory, and transferred to the BICU.

When data compressed with JBIG comes in on PSTN-2 (optional extra analog

line), the data is sent to the QM-CODER on the SG3 board for decompression.

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

VIDEO DATA PATH

B766D905.WMF

Table of Contents

B246 series B140 series D052 series