16
Nailing Brackets
The fireplace has nailing brackets on both sides. Secure the fireplace to the framing with the nailing brackets.
NOTE: Make sure the fireplace is square and plumb when placed in the framing. Measured corner-to-corner the
fireplace should be square. Use shims to insure the fireplace is square.
NOTE: The nailing brackets have two positions: standard and extended. See the section "Facing Requirements"
for details on which position is best for your installation.
NOTE: 2 holes are provided on
each side of the fireplace if you
wish to secure the base of the
fireplace to the floor (platform).
Standard Position
(nailing brackets as shown below)
© Travis Industries
Installation
(for qualified installers only)
a
b
c
Extended Position
(rotate nailing brackets as shown below)
4/19/23 - 1453
Rotate the two nailing
brackets out (each side)
Bend the two nailing
brackets out (each side)
Secure the fireplace to
the framing using the
nailing brackets
PB 42 & 54 MV/GSB2/GSR2 Install