FireplaceXtrordinair ProBuilder 54 Installation Manual page 70

70
6 Align the two holes on the bottom of the receiver assembly with the studs and secure the assembly to the
bracket using the two wing nuts removed in the previous step.
7 Connect the on/off switch wires (disconnected earlier) to the connectors on the back of the receiver.
-- For GSB2 appliances make sure to attach white wire to white wire, green wire to green wire.
-- For MV appliances, wire orientation does not matter.
8 Replace the dashboard.
9 Verify wires are not touching the bottom of the firebox. Adjust if necessary.
10 Install 4AA batteries into the receiver.
11 Install 3AAA batteries into the remote.
12 Sync the remote with the receiver (see syncing instructions included with remote).
13 Return the appliance to the correct configuration.
© Travis Industries
Installation
(for qualified installers only)
4/19/23 - 1453 PB 42 & 54 MV/GSB2/GSR2 Install