Summary of Contents for FireplaceXtrordinair 95400411
Page 1
Installation Details – 564 SS 36” 29” Page 1 of 6 564 SS / 564 E Rectangular Face Black 95400411 • Face • (2) 564 SS Top Brackets (w screws) • (2) 564 SS Upper Mounting Brackets • (2) 564 SS Lower Mounting Brackets •...
Page 2
Upper Left Lower Left Page 2 of 6 564 SS / 564 E Rectangular Face Black 95400411 Remove and discard the nuts and bushings above and below the firebox. Upper Bracket Place the upper and lower brackets in place and secure using the nuts included with this kit.
Page 3
The facing and hearth (if applicable) must be installed prior to attaching the face. See the installation manual for complete details. Raised Fireplaces Page 3 of 6 564 SS / 564 E Rectangular Face Black 95400411 Note how the tile is 1” (maximum) above the base of the fireplace. Floor-Level Fireplaces Maximum 1`”...
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks left on the surface may damage the face. Page 4 of 6 564 SS / 564 E Rectangular Face Black 95400411 7/19/07 Nickel 95400413 Attach the upper brackets to the face with the included nuts.
Page 5
Remove the stock upper heat shield. Page 5 of 6 564 SS / 564 E Rectangular Face Black 95400411 Place the upper heat shield included with this kit on top of the fireplace (note position of heat shield). Place the stock heat shield on top of it and secure with the same screws.
Page 6
Page 6 of 6 564 SS / 564 E Rectangular Face Black 95400411 Remove and discard the hinge assembly from the face. Tilt the face back slightly and insert the bottom hooks into the slots on the fireplace.