FireplaceXtrordinair ProBuilder 54 Installation Manual page 45

Thick Facing Guide
The thick facing guide is shipped pre-attached to the fireplace.
- Thick Facing - If using thick facing, leave the guide in place (see "Thick Facing" on the following page).
- Thin Facing - If using thin facing, you may remove the thick facing guide following the directions below (see
"Thin Facing" for details). NOTE: You may leave the thick facing guide in place – it will appear as a black border
around the screen assembly.
Removing the Thick Facing Guide
The thick facing guide consists of 4 sheet-metal strips behind the screen assembly. Remove the screen
assembly to access the guide. Unscrew the screws holding the pieces in place (see illustration below). NOTE:
The top piece is different than the bottom and has the letter "T" cut into it.
The thick facing guide may be removed after facing is installed.
© Travis Industries
Installation
(for qualified installers only)
Thick Facing Guide
Side Pieces
Phillips
Screwdriver
4/19/23 - 1453 PB 42 & 54 MV/GSB2/GSR2 Install
45
Thick Facing Guide
Top/Bottom Pieces