Technical Data - Siemens SICAM Manual

Product Specifications
4.1 Technical Data
4.1 Technical Data
Indication of Conformity
Technical Data
Table 4-1
Medium-voltage distribution
Highest withstandable voltage
System frequency
Internal battery
Auxiliary power supply
Sensor input interface
NOTE
i
i
When operating a SICAM EFI with an external DC power supply, make sure that the external DC power
supply meets the safety criteria for the environment where the SICAM EFI is operated. The external DC
power supply must be able to supply a safety extra low voltage (SELV) power to the SICAM EFI under the
conditions at the place of operation.
Binary Output
Table 4-2
Maximum switching voltage
Maximum switching power
52
This product complies with the directive of the Council of the European Commun-
ities on the harmonization of the laws of the Member States relating to
electromagnetic compatibility (EMC Directive 2014/30/EU) and concerning elec-
trical equipment for use within specified voltage limits (Low Voltage Directive
2014/35/EU) as well as restriction on usage of hazardous substances in electrical
and electronic equipment (RoHS Directive 2011/65/EU).
This conformity has been proved by tests conducted by Siemens AG in accordance
of the Council Directive in accordance with the generic standard IEC/EN 61326-1
and IEC/EN 61000-6-2 for EMC directive and with the standard IEC/EN 61010-1
and IEC/EN 61010-2-30 for Low Voltage Directive.
The device is designed and manufactured for application in an industrial environ-
ment.
RoHS directive 2011/65/EU is met using the standard IEC/EN 63000.
The product conforms with IEC 62689-1.
General Device Data
Binary Output
Up to 36 kV (+10%)
Up to 40.5 kV
50 Hz/60 Hz networks, ± 10 % tolerance
Field replaceable Lithium thionyl chloride battery (Li-
SOCl ) type AA cell size/3.6 V/2700 mAh
2
•
Either up to 15 years expected operational life
•
Or up to 2000 h of fault indication flashing
(single blink/second)
under standard operating temperature of 25 °C
AC 110 V to 230 V, ± 20 % tolerance
Power rating: 6 VA
DC 12 V to 24 V, ± 20 % tolerance
Power rating: 0.5 W
Operating range: 9 V to 38 V
(Safety extra low voltage - SELV)
Ground sensor input: S1 and S2 (via an electrical
cable)
AC 250 V/DC 220 V
62.5 VA/30 W
SICAM, Earth Fault Indicator, Manual
E50417-H8940-C600-A3, Edition 12.2022