Siemens SICAM Manual page 47

[dw̲efiflushmounting̲step1, 1, en̲US]
Figure 3-23
Once the device body is mounted on the bracket, reinsert and fasten the device front cover on to the
²
device using the 4 front cover screws.
Now mount the L-clamp bracket containing the device into the RMU panel cut-out using 2 screws and
²
nuts as shown in Figure 3-24. The L-clamp bracket is provided with 2 mounting holes at the top for
fastening the bracket to the RMU panel.
SICAM, Earth Fault Indicator, Manual
E50417-H8940-C600-A3, Edition 12.2022
Mounting EFI Body to Flush Mounting Bracket using Mounting Holes
3.9 Flush Mounting Bracket (L-clamp) Dimensions and Procedures
Installation and Commissioning
47