Siemens SICAM Manual page 39

[dw̲efibatteryreinsert, 1, en̲US]
Figure 3-15
Fit the device front cover again and screw it to the housing.
²
Perform battery check by pressing the push-button on the device front cover for more than 12 s and
²
releasing it. The battery LED is turned ON for 2 s and turned OFF indicating the battery is healthy and the
device is ready to use.
NOTE
i
i
Refer to Table 5-1 for more information on using battery check function in different scenarios.
SICAM, Earth Fault Indicator, Manual
E50417-H8940-C600-A3, Edition 12.2022
Inserting the New Battery
Installation and Commissioning
3.7 Replacing the SICAM EFI Battery
39