Type Testing - Siemens SICAM Manual

4.2 Type Testing
This section describes the type testing performed on SICAM EFI.
EMI/EMC Tests for Immunity (for SICAM EFI with signal lamp)
Test
Harmonic and Interharmonic
Voltage dips 15
16
Voltage dips
Surge immunity
Electrical fast transient/burst
Oscillatory waves immunity
Ring wave 18
Electrostatic discharge
Only applicable to the AC supply power port
15
Only applicable to the DC supply power port
16
17 On the auxiliary DC power supply port (Non isolated SELV circuit), Surge test, and electrical fast transient (EFT) test are not
applicable.
On auxiliary DC power supply port, only Differential Mode (DM) is applicable.
18
SICAM, Earth Fault Indicator, Manual
E50417-H8940-C600-A3, Edition 12.2022
Reference Standard
15 IEC 61000-4-13, Level 2
IEC 62689-1
IEC 61000-4-11
IEC 62689-1
IEC 61000-4-29
IEC 62689-1
17 IEC 61000-4-5, Level 3
IEC 62689-1
IEC 61000-4-4, Level 3
IEC 62689-1
IEC 61000-4-18, Level 3
18
IEC 62689-1
IEC 61000-4-12, Level 3
IEC 62689-1
IEC 61000-4-2, Level 3
IEC 62689-1
Product Specifications
4.2 Type Testing
Test Requirement
Performance criterion: A
Dips and Interruptions
0 %: 2.5 cycles
Performance criterion: A
Dips and Interruptions
0 %: 0.05 s
Performance criterion: A
Common Mode (CM): ± 2 kV
Differential Mode (DM): ± 1 kV
Direct application 2 Ω: Auxiliary AC
power port
40 Ω, 0.5 uF: sensor input, DC
binary input, AC binary input,
binary outputs
Performance criterion: B
± 2 kV on AC power port and
sensor input port, Burst frequency
5 kHz
± 1 kV on DC binary input, AC
binary output, binary output, signal
lamp output
Performance criterion: B
± 2.5 kV CM on AC power port,
AC/DC binary input, binary output
± 1 kV DM on AC power port,
DC power port, sensor input port,
AC/DC binary input, binary output
Frequency: 100 kHz, 1 MHz
Performance criterion: B
± 2 kV CM
± 1 kV DM
Frequency: 100 kHz
Performance criterion: B
8 kV air discharge and 6 kV contact
discharge
Performance criterion: B
57