Siemens SICAM Manual page 46

Installation and Commissioning
3.9 Flush Mounting Bracket (L-clamp) Dimensions and Procedures
[dw̲efiflushmounting̲cutout, 1, en̲US]
Figure 3-22
Remove the device front cover by unscrewing the screws at the 4 corners as seen from the front side.
²
Refer Figure 3-2.
Fasten the SICAM EFI body containing the PCBA and glands to the flush mounting bracket using screws
²
and nuts through the mounting holes as shown in Figure 3-23. The device mounting holes are specified
in Figure 3-3.
46
Recommended Panel Cut-out Size
SICAM, Earth Fault Indicator, Manual
E50417-H8940-C600-A3, Edition 12.2022