INFORMATION DISPLAY
uPA current Version
1
CPA
Boot Version
CPA Current Version
GUI Current Version
GUI Restore Version
My Settings Menu (5671)
menu: Settings > My Settings.
The My Settings menu is used to customize the equipment user interface localization and
Workouts default settings.
To learn about the R40 console My Settings service menu, see the TRM445 Owners
Manual:
l
Owners
R20 Standard Service Menus
R20 Standard Service Menus
The Standard Service Menus include the Hardware Validation, Information, and My Set-
tings service menus.
TIP: To learn additional information about the R20 console standard service menus,
refer to the TRM425 Owners Manual, see
Hardware Validation (51765761)
Service Access Code: 51765761 (see
page 28)
The Hardware Validation menu provides a set of automated hardware diagnostic tests and
calibration procedures used to troubleshoot, calibrate, and verify machine operation. The
diagnostic tests are customized for the particular equipment type and console configuration.
1
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
The console upper current software version information.
The CPA boot up software version.
The CPA current operating software version.
The graphic userI interface software version.
The graphic userI interface restore software version.
Manual.
"R20 How To Access Standard Service menus" on
4 Standard Service Menus
R20 Standard Service Menus
DESCRIPTION
.
Owners Manual
Page 31