Procedure 3.4 - Club Settings - Precor C542i Manual

Procedure 3.4 - Club Settings

1. Start pedalling and continue to pedal as you perform step 2.
With the PRECOR banner scrolling, press keys RESET,5,6,5,1,5,6,5, sequentially.
2.
The message SET CLUB PARAMETERS will be displayed for a few seconds.
3.
The message SELECT LANGUAGE will be displayed followed by the currently selected
4.
language. Use the
key to advance to units of measurement.
The message SELECT UNITS will be displayed followed by the currently selected unit of
5.
measurement. Use the
measurements. Press the ENTER key to advance to maximum workout time.
The message SET MAX WORKOUT TIME will be displayed followed by the currently
6.
selected maximum workout time. Use the
time. The maximum workout time may be set between 1 and 240 minutes or no limit. Press
ENTER to advance to maximum pause time.
The message SET MAX PAUSE TIME will be displayed followed by the currently selected
7.
maximum pause time. Use the
maximum pause time is the that will elapse after the pause key has been pressed until the
unit resets. The maximum pause time may be set between 1 and 120 seconds. Press
ENTER to exit the club settings program.
keys to select the language preference. Press the ENTER
and
keys to select either U.S. Standard or METRIC
and
and
C542i Elliptical Fitness Crosstrainer
and keys to select the maximum workout
keys to select the maximum pause time. The
Page 11