Precor Precision 400 Series Service Manual page 49

DIAGNOSTIC TEST
Information Display (65)
menu: Settings > Information.
Service Access Code: 65 (see
The Information Display provides the equipment usage, hardware, software, error code,
and maintenance information:
INFORMATION DISPLAY
Home softkey
Error Log softkey
ODOMETER
USAGE
SW Release P'N
Hardware Version
Console S/N
2
LPCA VersionSW
uPA BOOT SW
1
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
2
Lower Printed Circuit Assembly board; also refered to as the Lower PCA or simply as the
lower board. On treadmills, it is the console to base function interface and the motor con-
troller unit (MCU). On self-powered units, it is the lower PCA console to base function inter-
face.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
TEST DESCRIPTION
Nominal value: 242 ±5 @ 15% incline
l
"" on page 37)
Softkeys
Select Home to exit and return to the Home page.
Select Error Log to open the Error Log table, see
Log Display" on page 216
Information Parameters
The total number of accumulated miles (or kilometers) on
the unit.
This value is stored in the upper
the PCA is replaced the accumulated miles would start
again from "0".
The total machine usage hours (hours : min).
This value is stored in the upper PCA in the console so if
that PCA is replaced the hours of use would start again
from "0".
The operating system software part number.
Hardware version.
Console serial number.
The LPCA software version.
The console upper boot software version information.
4 Standard Service Menus
Standard Service Menus
DESCRIPTION
1
PCA in the console so if
."Error
Page 41