Precor Precision 400 Series Service Manual page 69

Return To Service
15. Reinstall the stairarms, see
1
16. Plug in the power cord and switch the power "ON"
17. Start a manual workout and operate the machine from min to max resistance and
incline at low and high spm. Verify that the belts operate correctly, no slipping or
unusual noises.
18. Reinstall all removed covers, see
19. Verify operation and return to service, see
1
Device power cord connector or electrical cable male connector that is inserted into an
electrical receptacle "outlet" (also called the plug-in).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Input Drive and Step-up Belt Tension Adjustment
"Stairarm Assembly Replacement" on
"Covers and Panels Replacement" on
("Operation Verification" on
5 Adjustment Procedures
page 163.
page 75.
page 19).
Page 61