Input Drive Assembly Replacement; Procedure - Precor Precision 400 Series Service Manual

Input Drive Assembly Replacement

This procedure provides instruction to replace the Input Drive Assembly.

Procedure

Review entire procedure before starting.
WARNING: Care must be taken when work is being performed in the area of the
stairarms. Pinch points exist between the stairarm and ramp and between the
stairarm and crankarm, when the rear covers are removed.
Removal
1. Switch the power OFF and
2. Remove these rear drive covers: the drive cover access panel, top, left, and right
drive covers (see
1
Disconnect a device power cord plug or cable connector from the power receptacle or out-
let.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
unplug the power cord.
"Covers and Panels Replacement" on
6 Available Replacement Procedures
Input Drive Assembly Replacement
page 75).
Page 137