6. Verify the Step-up belt tension, see
page 50.
a. If the Step-up belt tension is out of specification limits. then re-tension both the
Drive belt and Step-up belt to specification, see
Alignment Procedure" on
7. Replace all removed covers, see
8. Do the Operation Verification tests (see
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Available Replacement Procedures
"Belt Tension and Alignment Verification" on
page 53.
"Covers and Panels Replacement" on
"Operation Verification" on
Idler Pulley Replacement
"Belt Tension Adjustment and
page 75.
page 19) and
Page 143