Precor Precision 400 Series Service Manual page 107

1
1. Plug the power cord into the Power Entry Module and into the wall power outlet.
2. Switch the power "ON" and verify that the console powers up.
3. Switch the power "OFF" and verify that the console powers up.
4. Reinstall all removed covers, see
5. Verify machine operation, see
vice.
1
Device power cord connector or electrical cable male connector that is inserted into an
electrical receptacle "outlet" (also called the plug-in).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Covers and Panels Replacement" on
"Operation Verification" on page 19
6 Available Replacement Procedures
Power Entry Module Replacement
page 75.
and return to ser-
Page 99