Precor Precision 400 Series Service Manual page 75

12. Switch the power "ON".
13. Start a manual Workout. Operate the INCLINE controls through the minimum to max-
imum limits while verifying normal incline operation.
14. Switch the power "OFF".
15. Reinstall all removed covers, see
16. Verify full operation and return to service, see ().
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Covers and Panels Replacement" on
5 Adjustment Procedures
Lift Motor Calibration
page 75.
Page 67