Precor Precision 400 Series Service Manual page 117

11. Reinstall the console and reconnect the Data , Ground, and Heart Rate cables, see
"Console Replacement" on
12. Reinstall the top shroud display bracket cover, see
ment" on page 75.
13. Reinstall these rear drive covers: the drive cover access panel, top, left, and right
drive covers (see
14. Plug in the power cord and switch the power ON.
15. Start a manual workout and verify that the console powers up and operates normally.
16. Do the Operation Verification tests (see
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
page 93.
"Covers and Panels Replacement" on
6 Available Replacement Procedures
"Covers and Panels Replace-
page 75).
"Operation Verification" on
Data Cable Replacement
page 19) and
Page 109