Mitsubishi CR800 Series Instruction Manual page 59

Error No.
L4200 Error message Cannot write to file
Cause
Measures
L4210 Error message Too long statement
Cause
Measures
L4220 Error message Syntax error
Cause
Measures
L4230 Error message The line No. does not exist
Cause
Measures
L4240 Error message The statement is write protected
Cause
Measures
L4250 Error message No more lines or variables
Cause
Measures
L4300 One of the errors below is detected.
Please take measures corresponding to an error message.
Error message Too long variable name
Cause
Measures
Error message Too long variable/function name
Cause
Measures
L4310 Error message Illegal character is used
Cause
Measures
L4320 Error message The variable is write protected
Cause
Measures
L4330 Error message The variable is read protected
Cause
Measures
L4340 Error message The variable is not defined
Cause
Measures
L4341 Error message The user external variable is not defined.
Cause
Measures
L4350 Error message Duplicate definition (Val.)
Cause
Measures
L4360 Error message Same variable used (65535 times)
Cause
Measures
Write operation is prohibited, or the file capacity is insufficient.
1. Enable file writing.
2. Delete unnecessary files.
The command statement length is limited to 240 characters.
Delete the No. of characters in the command statement to within 240 characters.
There is an error in the syntax of the input command statement.
Re-input in the correct syntax after checking the contents.
There is no specified line number.
Check the contents, and reinput the correct line No.
The command statement is write protected.
Cancel the write protection.
Reading of lines and variables exceeding the registered ones.
Check the programs.
The variable name length is limited to 16 characters
Shorten the variable name to within 16 characters
The variable/function name length is limited to 32 characters.
Shorten the variable/function name to within 32 characters.
A character other than A to Z or 0 to 9 was used.
Use the character which can be used.
The variable is write protected.
1. Use a writable variable.
2. Cancel the write protection.
The variable is read protected.
1. Use a writable variable.
2. Cancel the write protection.
The variable has not been defined.
Define the variable.
The user external variable has not been defined
Define the user external variable
Variables already defined cannot be redefined with the Dim or Def statements.
1. Change the variable name and define.
2. Delete the defined variable.
Example: 1 P1=P1+P2 references P1 twice and P2 once.
Change the program to reduce the No. of times the same variable is used.
Error cause and measures
1Error list
1-50
Error no. L4200