Disablement Functions; Supervisory Disablements - C-TEC CAST ZFP Installation, Maintenance & Operating Manual

CAST ZFP Analogue Addressable Fire Alarm Panel
8.8

Disablement Functions

This function allows you to enable or disable parts of the system including zones, individual devices,
sounders, Input Groups, Output Groups and the panel's integrated printer (if fitted).
Remember, any active disablement(s) can be viewed (and cleared) at any access level by pressing the yellow
button on the top line of the touchscreen.
Note: It is strongly recommended all disablements are regularly reviewed and immediately cleared when no
longer necessary as they can have a major effect on how the system works.
Enter AL3 (4444) press the
Note: If a function is unavailable it will be 'greyed' out, e.g. the
8.8.1

Supervisory Disablements

This function is only available when there are hidden 'supervisory' disablements on the system, which are
programmed by an authorised systems engineer. Supervisory functions include non-fire, non-fault related
events, e.g. class change, gas shut off valve operated, emergency lighting system signals, etc.
Enter AL3 (4444) > Disablement Functions press the
the one shown below will appear detailing the type and location of the disablement. Note: The total number(n)
of disablements is also shown on the yellow
To cancel a specific disablement, press the individual disablement display (Disabled Sounder A located in
Zone 1 – Reception Area is shown in this example). A small
Press this button to confirm the cancellation.
Page 49 of 60  Approved Document No. DFU5030000 Rev 4  Installation and Programming Manual
button and a window similar to the one shown below will appear.
button ('3' shown in example below).
If there are more than one disablement, the top right
corner of the window will show, for example "1 / 3" and
can be scrolled through using the
or by using the scroll bar.
button.
button and a window similar to
and
button appears (shown below).
buttons,