Authentication; Figure 15 Authentication Screen - Nortel 2220 Using Manual

Lan

Hide thumbs Also See for 2220:

Table of Contents

[Final Draft—Nortel Confidential]

Authentication

Management access will be checked against the authentication database stored on

the access point. If a remote authentication server is used, you must specify the

authentication sequence and the corresponding parameters (see "Radius" on page

28) for the remote authentication protocol.

MAC Authentication (Default: Local MAC)

Selecting the MAC authentication allows you to define access permission and

precedence. For Local MAC Authentication go to page 32. For Radius MAC

Authentication see the following page.

Note: Be sure to set up the Radius MAC authentication for the client on

the Radius server before using the Radius MAC service.

Using the Nortel Networks Wireless LAN Access Point 2220

Chapter 2 System Configuration

Table of Contents