Configuring A Dns Server - Nortel Contivity 1010 Manual

Alternatively, you can use the following CLI commands to configure the
static address (for example, 47.17.2.23/24) and default gateway (for example,
47.17.2.1):
interface fastethernet 1/1
ip address type static
ip address 47.17.2.33 255.255.255.0
ip route 0.0.0.0 0.0.0.0 47.17.2.1 enabled
exit

Configuring a DNS server

You can configure up to four DNS servers. The ISP can assign more than one
DNS server, which are displayed on the screen, but cannot be changed. You
should enable split DNS if your DNS name space has been split into private
names and public names; a DNS server knows the private names while another
server knows the public Internet DNS names.
Figure 10 shows the System→Identity screen
Chapter 2 Getting started 37
New Features for the Contivity 1010/1050/1100