Inserting The Remote Gateway 9110 Circuit Card - Nortel Remote Gateway 9110 Installation And Administration Manual

June 2005
3 Unscrew and remove the footstand of the digital telephone.
Note: Refer to "A" in the following diagram.
4 Punch out the front panels in the footstand of the telephone to make the
connections accessible when you install the Remote Gateway 9110 circuit
card.
Note: Refer to "B" in the preceding diagram.

Inserting the Remote Gateway 9110 circuit card

To insert the Remote Gateway 9110 circuit card into your digital telephone:
1 Remove the Remote Gateway 9110 circuit card from the antistatic bag.
2 Insert the leading edge of the Remote Gateway 9110 circuit card under the
two brackets on the footstand.
Note: Refer to "C" in the following diagram for the location of the brackets.
Remote Gateway 911x Series Installation and Administration Guide
Installing the Remote Gateway 911x series unit
B
A
G101492
59