Product Introduction; Remote Gateway 9110 Unit - Nortel Remote Gateway 9110 Installation And Administration Manual

Remote Gateway 911x Series description

Product Introduction

Remote Gateway 911x series units provide full-featured host Private Branch
Exchange (PBX) services to single users in small remote or home offices.
Remote Gateway 911x series units require each of the following components:
a Remote Gateway 911x series unit
a Reach Line Card (RLC)
a 10BaseT Ethernet interface to an Internet Access Device (IAD)
an analog interface to an analog telephone line, if using Nortel's patented
Quality of Service (QoS) Transitioning Technology
This section provides a brief description of each component used to provide
Remote Gateway 911x series functionality.

Remote Gateway 9110 unit

The Remote Gateway 9110 unit is a circuit card that fits in the base of a
Meridian digital telephone set. The circuit card relays voice and signaling
information between the digital telephone connected at your office and the RLC
installed on the host PBX using one or both of the following options:
Internet Protocol (IP) network
Public Switched Telephone Network (PSTN)
Refer to the following chapters for additional information:
Chapter 3, "Installing the Remote Gateway 911x series unit"
Chapter 4, "Configuring the 911x unit using the telephone menu", or
Chapter 5, "Changing configuration settings using Configuration Manager"
2 Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0