Troubleshooting
Software problems
This section identifies some problems that can occur with the Configuration
Manager software, and describes what to do to resolve them.
Symptom descriptions
If you are not able to complete a task with the Configuration Manager, perform
troubleshooting as described in the following table.
Symptom
10060 TELNET CONNECTION
FAILED
to connect to the Remote
Gateway 911x series unit.
The Remote Gateway 911x series
unit does not send or receive
Ethernet traffic.
Display Logs definitions
You can locate Display Logs definitions in Configuration Manager Help.
224
appears when attempting
Remote Gateway 911x Series Installation and Administration Guide
What to do
It is possible that communication has been
lost between the administration PC and the
Remote Gateway 911x series unit.
Close the Configuration Manager, then
restart it.
It is possible that communication has been
lost between the administration PC and the
node you were logged on to.
Close the Configuration Manager, then
restart it.
Standard 3.0