Nortel Remote Gateway 9110 Installation And Administration Manual page 224

Administration
3 Click on the Browse button.
Result: The Open dialog box displays, similar to the following:
4 Ensure the Files of type drop down box shows Upgrade Files (*.UPG).
5 Navigate to the folder where the firmware file is located.
6 Select the file, and then click on the Open button.
Example: For Remote Gateway 911x series unit firmware, select
911X.upg, and click on the Open button.
Result: The Software Upload dialog box reappears. The file you selected is
shown in the Uploaded File box.
7 Click on the Upload button.
Wait until the file uploads completely before entering any other commands.
The Log Report window displays a confirmation message when the
upgrade is completed.
Note: Configuration Manager prompts you to restart the
911x series unit
procedure on page 205.
200
after upgrading the firmware. To do this, follow the
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0
Remote Gateway