Nortel Remote Gateway 9110 Installation And Administration Manual page 126

Configuring the 911x unit using the telephone menu
IF you want to
confirm your
instruction to
restart the Remote
Gateway 911x
series unit,
shut down the
Remote Gateway
911x series unit,
thereby disabling
all functionality
on the unit,
102
THEN do the following:
3 Press 1 to restart the Remote Gateway 911x series
unit.
4 Press the Hold key.
Result: The telephone display informs you that it is
restarting the system, similar to the following:
Restarting the System
Please Wait...
5 When the system restarts, the telephone display
returns to its normal state, showing the time and
date, similar to the following:
JAN 01 12:13 P
6 If the telephone is connected to a PBX, it is ready to
send and receive telephone calls as normal.
7 If the telephone is not connected to a PBX, the
telephone display shows a message similar to the
following:
HOSTLESS MODE
1 Press 0.
2 Press the Hold key.
Result: The telephone display asks you to confirm
your instruction to shut down the Remote Gateway
911x series unit, similar to the following:
Confirm?
[1-Yes 2-No]
Note: Only choose the shut down option when you
have physical access to the remote unit. You must be
able to disconnect then reconnect power to the Remote
Gateway 911x series unit to be able to access the unit
again.
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0