Nortel Remote Gateway 9110 Installation And Administration Manual page 198

Administration
Bandwidth Connection Statistics field descriptions
The following table describes the statistics on the Bandwidth Connection
Statistics screen:
Statistic
Remote Unit Number
Signaling Status
No of Voice Calls on
IP
No of Voice Calls on
PSTN
Used IP BW
Used Trunk BW
Total Up Trunk BW
IP QoS Status
174
Description
Identifies the remote unit that initiated the call.
Identifies whether a connection is up on this unit.
Valid values are Active and Idle.
Identifies the number of calls in progress on this unit's
IP connection.
Identifies the number of calls in progress on this unit's
PSTN connection.
Identifies the IP bandwidth in use on this unit.
Identifies the PSTN bandwidth in use on this unit.
Identifies the total PSTN bandwidth up and available
to this unit.
Identifies the Quality of Service (QoS) level on this
unit's IP connection.
Valid values are Good and Bad.
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0