Nortel Remote Gateway 9110 Installation And Administration Manual page 101

June 2005
4 The telephone display asks if you want to restore default values, similar to
the following:
Restore Default Values?
[1-Yes 2-No]
IF you want to
retain current
configuration
settings for this
Remote Gateway
911x series unit,
revert Remote
Gateway 911x
series unit
configuration
settings to their
factory-set default
values,
Remote Gateway 911x Series Installation and Administration Guide
Configuring the 911x unit using the telephone menu
THEN do the following:
1 Press 2.
2 Press the Hold key.
3 Proceed to step 5 on page 78.
1 Press 1.
2 Press the Hold key.
Result: The telephone display asks you to confirm
your decision, similar to the following:
Confirm?
[1-Yes 2- No]
3 Press 1 to confirm your decision, or press 2 to retain
current settings.
4 Press the Hold key.
77