Nortel Remote Gateway 9110 Installation And Administration Manual page 135

June 2005
Field
Emergency Feature
Remote Gateway 911x Series Installation and Administration Guide
Changing configuration settings using Configuration Manager
Description
Click on the Emergency Feature button to configure
emergency activation codes.
Result: The Emergency Activation Code dialog box
displays.
Emergency Code
Enter the number that the user must dial to tell the
PBX to send to the CO the emergency service
telephone number in the Dialed Number field
immediately to the right.
The first default is 911. Subsequent defaults are NC
(Not Configured).
Dialed Number
Enter the DN of the emergency service that you
want the PBX to send to the CO when the user dials
the Emergency Code in the field immediately to the
left.
The first default is 911. Subsequent defaults are NC
(Not Configured).
Note: Enter only the Emergency Activation Code (for
example, 911 in North America). Do not include the
trunk access code because the Emergency Activation
code dials out directly on the PSTN.
111