Nortel Remote Gateway 9110 Installation And Administration Manual page 102

Configuring the 911x unit using the telephone menu
5 The telephone display asks if you want to modify the unit ID of the Remote
Gateway 911x series unit, similar to the following:
Modify Unit ID?
[1-Yes 2-No]
IF you want to
modify the Unit
ID of the Remote
Gateway 911x
series unit,
retain current Unit
ID of the Remote
Gateway 911x
series unit,
6 The telephone display asks if you want to modify the Remote Gateway
911x series unit's setting for the difference in the time at the local site and
the remote site, similar to the following:
Modify Time Offset?
[1-Yes 2 - No]
Note: The Remote Gateway 911x series unit derives the time on its
telephone display from the time maintained by the host PBX. The time
offset is the number of minutes that the Remote Gateway 911x series unit
must add to, or subtract from the host-site time (to account for different time
zones, for example) to calculate the remote-site time.
78
THEN do the following:
1 Press 1.
2 Press the Hold key.
Result: The telephone display prompts you for the
new Unit ID and displays the current Unit ID, similar
to the following:
Enter Unit ID of 911x
1
3 Press the digit(s) of the new Unit ID.
4 Press the Hold key.
5 Proceed to step 6 on page 78.
1 Press 2.
2 Press the Hold key.
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0