Nortel Remote Gateway 9110 Installation And Administration Manual page 138

Changing configuration settings using Configuration Manager
Field
Local Call: Autohold
Phone Type
Modem Tones
Analog Localization
114
Description
Click on the Enable option button if you want to be
able to switch between local and remote calling
keys without losing an active call.
Click on the Disable option button if you want to
disconnect active calls when you access another
call without pressing the Hold key first.
The default is Disable.
Note: This field is only available when you select the
Local Call: Status: Enable option.
Select the type of digital telephone that the Remote
Gateway 911x series unit attaches to, using the drop
down list box.
Valid options are M2008, M2216, M2616, M2616CT,
M3310, M3820, M3902, M3903, M3904, M3905, and
OTHER.
The default is M2616.
Click on the Enable option button to activate
modem tones on the telephone.
Click on the Disable option button to deactivate
modem tones.
The default is Disable.
If you are using only the IP network to route calls,
leave this field blank.
Select one of three options from the drop down list box
to modify the localization setting for this unit.
Valid options are FCC, CTR21, and Custom.
The default is FCC.
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0