June 2005
IF you want to
enable prioritizing
of voice packets in
the IEEE Media
Access Control
layer (802.1Q),
(continued)
not enable
prioritizing of
voice packets in
the IEEE Media
Access Control
layer,
13
The telephone display asks if you want to modify RLC Parameters, similar
to the following:
Modify RLC Parameters?
[1-Yes 2-No]
IF you want to
retain the current
RLC settings,
Remote Gateway 911x Series Installation and Administration Guide
Configuring the 911x unit using the telephone menu
THEN do the following:
7 Enter the DiffServ CodePoint value.
Valid entries are 0 (CS7), 1 (CS6), 2 (EF), 3 (AF41),
4 (AF31), 5 (AF21), 6 (AF11), and 7 (DE). The
default is 7 (EF). Refer to "DiffServ CodePoint:
Value" on page -121 for details on the definitions
for these entries.
8 Press the Hold key.
9 Proceed to step 13.
1 Press 2.
2 Press the Hold key.
THEN do the following:
1 Press 2.
2 Press the Hold key.
3 Proceed to step 18 on page 99.
89