Planning for installation
Physical environment
This section provides the space, temperature, cabling, and mounting information
you need to know before you install Remote Gateway 911x series units.
Space
Insert the Remote Gateway 9110 unit into the base of a digital telephone set. The
dimensions for the circuit card are as follows:
16.5 cm (6.5 inches) wide
8.8 cm (3.5 inches) deep
Place the Remote Gateway 9115 unit on a desk, or mount it on the wall. The
dimensions for the unit are as follows:
18.2 cm (7.2 inches) wide
9.9 cm (3.9 inches) deep
Temperature
The table on the following page describes the temperature and humidity
conditions that the Remote Gateway 911x series unit can withstand without any
performance degradation or damage.
40
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0