Time Since Last Service (4.9.2.); Time Until Next Service (4.9.3.); Reminder Activation (4.9.4.); Reminder 1 (Required) (4.9.5.) - Siemens SITRANS LR560 Operating Instructions Manual

Parameter Reference
8.4 SERVICE (4.)
8.4.9.3

TIME SINCE LAST SERVICE (4.9.2.)

Time elapsed since last service. Can be reset to zero after performing a service. Can be
reset locally by entering 0 in this parameter.
To reset to zero:
● In SIMATIC PDM, open the menu Device – Maintenance, click on the Service Schedule
tab, and click on Service Performed to restart the timer and clear any fault messages.
● Via the handheld programmer, manually reset Time since Last Service to zero.
8.4.9.4

TIME UNTIL NEXT SERVICE (4.9.3.)

Read only. SERVICE INTERVAL (4.9.1.) (Page 127) less TIME SINCE LAST SERVICE
(4.9.2.) (Page 128).
8.4.9.5

REMINDER ACTIVATION (4.9.4.)

Note
Modifications via SIMATIC PDM
Parameter is accessed via the menus Device – Maintenance.
Factory setting:
Setting range:
Purpose:
Description:
8.4.9.6

REMINDER 1 (REQUIRED) (4.9.5.)

Factory setting:
Setting range:
Purpose:
Description:
128
Timer OFF
Timer OFF
ON NO LIMITS
ON REMinders 1 and 2 checked
ON REMinder 2 (Maintenance Demanded) checked
Allows you to enable a maintenance reminder.
1. First set the values in REMINDER 1 (REQUIRED) (4.9.5.) (Page 128) /
REMINDER 2 (DEMANDED) (4.9.6.) (Page 129).
2. Select the desired Reminder Activation option.
0.164 years
0 to 20 years
If TIME UNTIL NEXT SERVICE (4.9.3.) (Page 128) is equal to or less than
this value, the device generates a Maintenance Required reminder.
1. Modify values as required.
2. Set REMINDER ACTIVATION (4.9.4.) (Page 128) to the desired option.
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE