Daikin Emura RXJ20A5V1B Service Manual page 94

4 | Components
To install the front panel motor wiring harness
Service manual
94
a
c
a Wifi control PCB
b Connector on indoor unit main PCB
c Connector on switch box
5 Route the wiring harness out of the harness retainer (top of the switch box)
and remove the front panel motor wiring harness.
6 To install the front panel motor wiring harness, see
4
procedures" [ 92].
1 Connect the front panel motor wiring harness to the switch box.
a
c
a Wifi control PCB
b Connector on indoor unit main PCB
c Connector on switch box
2 Route the wiring harness through the harness retainer (top of the switch box).
3 Connect the other end of the front panel motor wiring harness to the indoor
unit main PCB.
4 Install the wifi control PCB, see
5 Install the switch box on the indoor unit, see
Is the problem solved?
Yes
No
b
b
"4.20.2 Repair procedures" [
"4.14 Plate
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
"4.5.2 Repair
4
177].
4
work" [ 144].
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04B – 2022.08