Daikin Emura RXJ20A5V1B Service Manual page 143

To install the propeller fan blade assembly
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04B – 2022.08
e f
a Tie strap
b DC fan motor harness
c Switch box
d Fan motor bracket
e Screw
f DC man motor assy
3 Route the DC fan motor harness through the harness retainers (at the back of
the fan motor bracket) and bend the harness retainers to attach the DC fan
motor harness.
4 Attach the DC fan motor harness to the switch box.
5 Install a new tie strap to fix the DC fan motor harness to the switch box.
6 Connect the DC fan motor connector to the connector on the main PCB.
7 Install the propeller fan blade assembly, see
1 Install the propeller fan blade assembly on the DC fan motor assembly.
CAUTION
Do NOT install a damaged propeller fan blade assembly.
2 Install and tighten the nut to fix the propeller fan blade assembly.
a Nut
b Propeller fan blade assembly
Is the problem solved?
Yes
c
d e
a
a b
Action
No further actions required.
4 Components
|
b
4
"Repair procedures" [ 141].
Service manual
143