Daikin Emura RXJ20A5V1B Service Manual page 189

To add refrigerant
Repair information
Refrigerant piping handling
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04B – 2022.08
L
a
a Vacuum pump
b Connect flexible hose to service port
c To recovery pump
L Low pressure
H High pressure
V Vacuum
R Refrigerant
3 To add refrigerant, see
Is the problem solved?
Yes
No
1 See the installer reference guide for the correct procedure.
Is the problem solved?
Yes
No
▪ Make sure that the applied pressure is never higher than the unit design pressure
indicated on the nameplate (PS).
▪ Work according to the F‑gas regulation and/or local regulations.
▪ Make sure the correct amount of refrigerant is charged after repair according to
the F‑gas regulation label on the unit (factory + additional where required).
5
H
V R
b
"5.2.2 Repair procedures" [
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
Action
No further actions required.
Return to troubleshooting of the
specific error and continue with the
next procedure.
Third party components
|
c
4
187].
Service manual
189