Daikin Emura RXJ20A5V1B Service Manual page 116

4 | Components
To remove the intelligent thermal sensor wiring harness
Service manual
116
3 Route the wiring harness along the harness retainers on the intelligent
thermal sensor assembly.
4 Click the intelligent thermal sensor assembly on the indoor unit.
a Intelligent thermal sensor assembly
Is the problem solved?
Yes
No
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
1 Carefully click the complete intelligent thermal sensor assembly out of the
indoor unit.
a Intelligent thermal sensor assembly
2 Disconnect the wiring harness from the intelligent thermal sensor PCB.
3 Disconnect the wiring harness connector from the indoor unit main PCB.
4 Cut all tie straps (if any) that fix the wiring harness.
5 Route the wiring harness out of the harness retainers and remove the
intelligent thermal sensor wiring harness.
a
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
"4.14 Plate
a
4
work" [ 144].
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04B – 2022.08