Table of Contents
Advertisement
3. You should now see a screen similar to the one shown below.
4. Click Settings.
5. Click Zones.
6. Click Learn:
7. Activate the zone. Consult the detector manual for instructions, generally this
is performed by opening the detector's case. This will send a tamper signal to
xGenConnect.
8. The screen will indicate the device has been learnt and a serial number will
appear.
9. Customize zone settings if required by referring to the Zone Guide, Zone
Profile Type Guide, and Zone Options Guide on the following pages.
xGenConnect Installation and Programming Guide
51
Hide quick links:
Advertisement
Table of Contents
