Disclaimer; Intended Use - Interlogix xGenConnect NXG-4 Installation And Programming Manual

Hide thumbs Also See for xGenConnect NXG-4:
Table of Contents

Advertisement

CARRIER FIRE & SECURITY DOES NOT WARRANT THAT ANY PRODUCT
(INCLUDING SECURITY PRODUCTS), SOFTWARE OR SERVICE
MANUFACTURED, SOLD OR LICENSED BY CARRIER FIRE & SECURITY
WILL PREVENT, OR IN ALL CASES PROVIDE ADEQUATE WARNING OF OR
PROTECTION FROM, BREAK-INS, BURGLARY, ROBBERY, FIRE, OR
OTHERWISE.
CARRIER FIRE & SECURITY DOES NOT WARRANT TO YOU THAT ITS
SOFTWARE OR PRODUCTS WILL WORK PROPERLY IN ALL
ENVIRONMENTS AND APPLICATIONS AND DOES NOT WARRANT ANY
PRODUCTS AGAINST HARMFUL ELECTROMAGNETIC INTERFERENCE
INDUCTION OR RADIATION (EMI, RFI, ETC.) EMITTED FROM EXTERNAL
SOURCES
CARRIER FIRE & SECURITY DOES NOT PROVIDE MONITORING SERVICES
FOR YOUR ALARM/SECURITY SYSTEM ("MONITORING SERVICES"). IF
YOU ELECT TO HAVE MONITORING SERVICES YOU MUST OBTAIN SUCH
SERVICE FROM A THIRD PARTY AND CARRIER FIRE & SECURITY MAKES
NO REPRESENTATION OR WARRANTY WITH RESPECT TO SUCH
SERVICES INCLUDING WHETHER OR NOT THEY WILL BE COMPATIBLE
WITH THE PRODUCTS, SOFTWARE OR SERVICES MANUFACTURED,
SOLD OR LICENSED BY CARRIER FIRE & SECURITY.

Disclaimer

THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE
WITHOUT NOTICE. CARRIER FIRE & SECURITY ASSUMES NO
RESPONSIBILITY FOR INACCURACIES OR OMISSIONS AND SPECIFICALLY
DISCLAIMS ANY LIABILITIES, LOSSES, OR RISKS, PERSONAL OR
OTHERWISE, INCURRED AS A CONSEQUENCE, DIRECTLY OR
INDIRECTLY, OF THE USE OR APPLICATION OF ANY OF THE CONTENTS
OF THIS DOCUMENT. FOR THE LATEST DOCUMENTATION, CONTACT
YOUR LOCAL SUPPLIER OR VISIT US ONLINE AT
FIRESECURITYPRODUCTS.COM.
This publication may contain examples of screen captures and reports used in
daily operations. Examples may include fictitious names of individuals and
companies. Any similarity to names and addresses of actual businesses or
persons is entirely coincidental.
The illustrations in this manual are intended as a guide and may differ from your
actual unit as xGenConnect is continually being improved.

Intended Use

Use this product only for the purpose it was designed for; refer to the data sheet
and user documentation. For the latest product information, contact your local
supplier or visit us online at firesecurityproducts.com.
The system should be checked by a qualified technician at least every 3 years
and the backup battery replaced as required.
xGenConnect Installation and Programming Guide
vii

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents