Relinquish Primary Control Of Xgenconnect To Another Controller - Interlogix xGenConnect NXG-4 Installation And Programming Manual

4. Press the Include button on the xGenConnect (the primary device):
5. xGenConnect now displays "Alarm is Primary Controller" to indicate
successful shift:
6. xGenConnect will now be the Primary Z-Wave Controller, and the other
network is the Secondary Z-Wave Controller.
Relinquish Primary Control of xGenConnect to another
Controller
1. Log in to the panel.
2. Click Settings > Z-Wave Add/Remove.
xGenConnect Installation and Programming Guide 79