Interlogix xGenConnect NXG-4 Installation And Programming Manual page 125

If no schedule is set (or is currently active) in either the first or second zone
profile then the zone will be disabled.
See the next section for programming custom zones.
Programming Sequence
7. Schedules
14. Holidays
3. Zones
a) Profile 1
b) Profile 2
15. Zone Type
16. Zone Options
12. Area Group
7. Schedule
1. User
Instructions
1. Go to Zones.
2. Select a zone number you want to program.
3. Enter a name for the zone.
4. Select a zone type preset.
5. Select a zone options preset.
6. Select an Area group for the zone. If you want a zone to be in its own Area
then select an Area group with only one Area. To create a zone in a common
xGenConnect Installation and Programming Guide
15. Zone Types
→ - Area Armed
- Area disarmed
4. Areas
→ a) Area Options
b) Area Timers
c) Area Reporting
7. Schedule
18. Channel Groups
16. Zone options
→
12. Area Groups
→
→
113