Interlogix xGenConnect NXG-4 Installation And Programming Manual page 2

© 2020 Carrier. All rights reserved. Specifications subject to change
Copyright
without prior notice.
This document may not be copied in whole or in part or otherwise
reproduced without prior written consent from Carrier, except where
specifically permitted under US and international copyright law.
Trademarks and Interlogix, xGenConnect name and logo are trademarks of Carrier.
patents
IOS is the registered trademark of Cisco Technology, Inc.
Android, Google and Google Play are registered trademarks of
Google Inc.
iPhone, Apple, iTunes are registered trademarks of Apple Inc.
App Store is a service mark of Apple Inc.
Amazon, Alexa and all related logos are trademarks of Amazon.com,
Inc. or its affiliates.
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
Manufacturer PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings and THESE PRODUCTS ARE INTENDED FOR SALE TO AND
disclaimers INSTALLATION BY QUALIFIED PROFESSIONALS. CARRIER
FIRE & SECURITY CANNOT PROVIDE ANY ASSURANCE THAT
ANY PERSON OR ENTITY BUYING ITS PRODUCTS, INCLUDING
ANY "AUTHORIZED DEALER" OR "AUTHORIZED RESELLER", IS
PROPERLY TRAINED OR EXPERIENCED TO CORRECTLY
INSTALL FIRE AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and product safety
information, please check
https://firesecurityproducts.com/policy/product-warning/ or scan the
QR code.
EU compliance
Certification EN 50131-1:2006 System requirements
EN 50131-3:2009 Control and indicating equipment
EN 50131-6:2017 Power Supplies
Security Grade 2, Environmental class II
EN 50136-2:2013 / EN 50131-10:2014
SP3, SP4 (IP or cellular); DP2, DP3 (IP and cellular)
This product was tested and certified to EN 50136-2:2013 for Alarm
transmission system performance SP3 and SP4 for reporting over
IP(LAN) to the UltraSync and OH NetRec.
This product was tested and certified to EN 50136-2:2013 for Alarm
transmission system performance SP3 and SP4 for reporting over
GPRS to the UltraSync and OH NetRec.