Interlogix xGenConnect NXG-4 Installation And Programming Manual page 131

Programming Sequence
6. Communicator
a) Options
b) IP Config
c) Ethernet
d) Radio
e) Dial IP
f) Email
g) Remote Access
h) System Event
Reporting
18. Channel Groups
4. Areas
a) Area Options
b) Area Timers
c) Area Reporting
7. Schedule
18. Channel Groups
Instructions
1. Go to Areas.
2. Select an Area Number.
3. Enter a descriptive name.
4. Select the Options you want to enable for this Area. Area 2 and above have
"Use Area 1 Options" ticked to allow faster programming of your system.
Untick this box if you want to customize options for Area 2 and above.
xGenConnect Installation and Programming Guide
5. Channels
→
6. Communicator
17. Event Lists
12. Area Groups
→
18. Channel Groups
→ →
119