D Quick Tuning Step; D Selecting "Khz" Step - Icom IC-756PROIII Instruction Manual

D D Quick tuning step
The operating frequency can be changed in kHz
steps (0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable)
for quick tuning.
D D Selecting "kHz" step
Mode selection
q Push [TS] momentarily to turn the quick tuning
[TS]
w Rotate the tuning dial to change the frequency in
e Push [TS] again to turn the quick tuning function
Tuning dial
r Rotate the tuning dial for normal tuning, if desired.
q Push [TS] momentarily to turn the quick tuning
[TS]
w Push [TS] for 1 sec. to enter the tuning step set-
Tuning dial
e Select the desired operating mode.
r Rotate the tuning dial to select the desired tuning
t Repeat steps e and r to select quick tuning
y Push [EXIT/SET] to exit the setting display.
BASIC OPERATION
function ON.
• "Z" appears when the quick tuning function ON.
Quick tuning indicator
BW BW 2.4k 2.4k 0
SFT SFT
ANT
1
VFO VFO
T X T X U S B U S B FIL2 FIL2
qr.qpp.pp
METER
Po
1 21.076.50 21.076.50
programmed kHz steps.
OFF.
• "Z" disappears.
step ON.
• "Z" appears when the quick tuning function ON.
ting display.
• Selected tuning steps for all modes appear.
TS TS
AGC AGC
MID MID
VOX VOX
SSB SSB CW CW RTTY RTTY
OFF OFF
1 1
COMP COMP
OFF OFF
WIDE WIDE
DEF DEF
step from 0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz.
• Push [(F-3)DEF] for 1 sec. to return to the default set-
ting, if desired.
steps for other modes, if desired.
3
qw:pp
12:00 12:00
CW CW
AM AM FM FM
1 1 10 10
(kHz) (kHz)
3
26