Frequency Setting; D Tuning With The Tuning Dial; D Direct Frequency Entry With The Keypad - Icom IC-756PROIII Instruction Manual

3
BASIC OPERATION

■ Frequency setting

The transceiver has several tuning methods for conve-
nient frequency tuning.
D D Tuning with the tuning dial
D D Direct frequency entry with the keypad
The transceiver has a keypad for direct frequency
entry as described right.
25
q Push the desired band key on the keypad 1–3
Band keys
Tuning dial
w Rotate the tuning dial to set the desired frequency.
q Push [(F-INP)ENT].
w Input the desired frequency.
Keypad
e Push [(F-INP)ENT] to set the input frequency.
[EXAMPLES]
14.025 MHz
18.0725 MHz
706 kHz
5.100 MHz
7.000 MHz
21.280
times.
• 3 different frequencies can be selected on each band
with the band key. (See previous page "Using the band
stacking register.")
ANT
BW BW 2.4k 2.4k SFT SFT 0
1
VFO VFO U S B U S B
T X T X
wq.wpp.pp
METER
Po
1 21.076.50 21.076.50
ANT
BW BW 2.4k 2.4k 0
SFT SFT
1
T X T X VFO VFO U S B U S B
wq.wot.pp
METER
Po
1 21.076.50 21.076.50
If the dial lock function is activated, the lock indica-
tor lights, and the tuning dial does not function. In
this case, push [LOCK/SPEECH] to deactivate the
lock function. (p. 65)
• " " appears.
• Push [(GENE)•] to input " • (decimal point)" between
the MHz units and kHz units.
• To cancel the input, push [MAIN/SUB] instead of
[(F-INP)ENT].
F-INP
1 4 • 0
ENT
F-INP
1 8 • 0
ENT
F-INP
•
ENT
F-INP
5
ENT
F-INP
F-INP 7
ENT
21.245 F-INP
F-INP •
ENT
qw:pp
12:00 12:00
FIL2 FIL2
CW CW
qw:pp
12:00 12:00
FIL2 FIL2
CW CW
F-INP
2 5
ENT
F-INP
7 2 5
ENT
F-INP
7 0 6
ENT
F-INP
• 1
ENT
F-INP
ENT
F-INP
2 4 5
ENT