Icom IC-756PROIII Instruction Manual page 118

16
CONTROL COMMAND
• Command table (continued)
Command Sub command
1A 0544
0545
0546
0547
0548
0549
0550
0551
0552
0553
0554
0555
0556
0557
0558
0559
0560
0561
0562
0563
0564
0565
0566
0567
0568
0569
113
Description
Send/read TX spectrum scope set
(0=OFF, 1=ON)
Send/read spectrum scope max.
hold set (0=OFF, 1=ON)
Send/read voice auto monitor set
(0=OFF, 1=ON)
Send/read cut number style
(0=Normal, 1=190→ANO,
2=190→ANT, 3=90→NO,
4=90→NT)
Send/read count up trigger chan-
nel (1=M1, 2=M2, 3=M3, 4=M4)
Send/read present number
(1–9999)
Send/read CW keyer repeat time
(1=1 sec. to 60=60 sec.)
Send/read CW keyer dot/dash
ratio (28=1:1:2.8 to 45=1:1:4.5)
Send/read rise time (0=2 msec.,
1=4 msec., 2=6 msec., 3=8 msec.)
Send/read paddle polarity
(0=Normal, 1=Reverse)
Send/read keyer type (0=Straight,
1=Bug-key, 2=ELEC-Key)
Send/read mic. up/down keyer set
(0=OFF, 1=ON)
Send/read scan speed (0=low,
1=high)
Send/read scan resume (0=OFF,
1=ON)
Send/read VOX gain (0=0% to
255=100%)
Send/read anti VOX gain (0=0% to
255=100%)
Send/read VOX delay (0=0.0 sec.
to 20=2.0 sec.)
Send/read RTTY filter bandwidth
(0=250 Hz, 1=300 Hz, 2=350 Hz,
3=500 Hz, 4=1 kHz)
Send/read twin peak filter (0=OFF,
1=ON)
Send/read timer functions (0=OFF,
1=ON)
Send/read DSP filter type
(0=SSB: sharp; CW: sharp,
1=SSB: sharp; CW: soft,
2=SSB: soft CW: sharp,
3=SSB: soft CW: soft)
Send/read quick RIT/∂TX clear
function (0=OFF, 1=ON)
Send/read SSB/CW synchronous
tuning function (0=OFF, 1=ON)
Send/read CW normal side set
(0=LSB, 1=USB)
Send/read external keypad type
(0=OFF, 1=Keyer send, 2=Voice
play (Tx), 3=Auto)
Send/read NB level (0=0% to
255=100%)
Command Sub command
1A 0570
0571
0572
0573
0574
0575
0576
06
07
1B 00
01
1C 00
01
Description
Send/read SSB transmit band-
width for WIDE setting
(Low: 100/300/500 Hz,
High: 2500/2700/2900 Hz)
Send/read SSB transmit band-
width for MID setting
(Low: 100/300/500 Hz,
High: 2500/2700/2900 Hz)
Send/read SSB transmit band-
width-NAR setting
(Low: 100/300/500 Hz,
High: 2500/2700/2900 Hz)
Send/read clock2 function
(0=OFF, 1=ON)
Send/read offset time for clock2
(240001=–24:00, 240000=+24:00)
Send/read screen saver setting
(0=OFF, 1=15 min, 2=30 min,
3=60 min)
Send/read RTTY TX USOS
(0=OFF, 1=ON)
Send/read DATA mode (0=OFF,
1=ON)
Send/read SSB transmit band-
width (0=Wide, 1=Middle, 2=Nar-
row)
Set repeater tone frequency
Set tone squelch tone frequency
Set the transceiver to receive or
transmit condition (0=Rx; 1=Tx)
Send/read tuner function (0=OFF,
1=ON, 2=Manual tune)